Day-by-day breakdown of a typical Huntsville roof replacement.
Day before: material drop
Shingles, underlayment, and accessories are delivered and staged in your driveway.
Morning: tear-off
Crews remove old shingles and inspect the deck for any rot or damage.
Mid-day: deck prep and underlayment
Synthetic underlayment and ice/water shield in critical areas (valleys, eaves).
Afternoon: shingle install
Most homes are installed in 6–8 hours of crew time.
End of day: cleanup
Magnet sweep for nails, debris haul-away, and final QC.
Need a real opinion on your roof?
Free, no-pressure inspections across Huntsville and North Alabama.
Local Factors That Change What To Expect During a Roof Replacement in Huntsville
Summer attic temperatures in the Tennessee Valley routinely run far above outdoor air when intake and exhaust ventilation are unbalanced. Heat from below ages asphalt shingles from the inside out, which is why two roofs installed the same year can be in very different condition.
Local code matters too. Roofing work inside Huntsville city limits follows the International Residential Code as adopted locally, which sets nailing patterns, drip edge, underlayment, and attic ventilation minimums — and allows no more than two roof coverings before a full tear-off is required. When a roof is replaced, the new installation has to meet current code even if the old one predated it.
What to Do Next
- 1Photograph what you can see from the ground, including gutters and downspouts, and note the date.
- 2Check the attic with a flashlight for daylight, damp insulation, or dark staining on the decking.
- 3Contain interior water with a bucket and move furniture before anyone gets on the roof.
- 4Get a roof-level inspection with photos of your own roof, not a generic report.
- 5Ask whether the condition is repairable, and what the remaining service life of the roof is.